Waterdrop TankLess 9-STAGE Reverse Osmosis G3P800 with UV Sterilizing Light

9-stage Deep Filtration + UV Sterilizing Light

• Tested by official third-party laboratory (SGS), through 10 stage filtration, G3P800 can effectively reduce PFAS, fluoride, heavy metals like lead, chromium, arsenic, iron, radium and calcium, salts like nitrate and chloride as well as large particles.
• Equipped with a long-lasting LED lamp that automatically turns on when water flows by, and has a sterilization rate of up to 99.9%.

Trusted Certification

• Certified against NSF/ANSI Standard 58 for TDS reduction and NSF 372 certified for lead-free material. See WD-G3P800 RO system test results for more.

• The RO membrane has a pore diameter of 0.0001 μm, which does not allow large molecules or ions to pass through. Therefore, it can reduce most of the contaminants in water.

• Waterdrop G3P800 RO system filters 800 gallons of water per day with a fast flow, producing one cup of water in just 6 seconds.
• Note that when using a different faucet rather than its own, the flow rate might be slower.

•  The tankless RO system G3P800 uses only one cup of wastewater to produce three cups of filtered water, thanks to advanced water dispensing technology.

• This tankless under-sink water filtration system saves 70% of under-sink space and avoids recontamination, providing you with pure and crisp water. Dimensions (cms) : ‎46.0 (D) x 14.4 (W) x 45 (H).

Smart Display Faucet

• The reverse osmosis water system is built with a smart display faucet with TDS monitoring and filter life-detecting functions, which helps you to get the water quality and filter life at a glance. *Please note that the TDS level may vary based on your local water quality.

• This under-counter water filter system has filter life indicators, which will monitor the service life in real time and notify you to replace the filters in advance.

• Compared to traditional water purifiers, the G3P800 Reverse Osmosis Water Filtration System has automatic water shut-off valves and fewer connectors, which reduces the risk of water leakage.
• This system’s noise does not exceed 55dB, which is a safe noise level for everyday life.

Easy to Install & Replace

• The Waterdrop G3P800 RO system can be installed in 30 minutes, and the filter can be changed in just 2 seconds.
• There’s no need to move the system, nor is there a need for tools.

• Made from Sri Lankan coconut shells, the activated carbon block efficiently removes taste and odor, thereby improving the taste of water

• Newborns are very delicate. Compared to tap water, RO water is purer, cleaner, and more suitable for babies. Milk powder made with RO water is easier to be absorbed.

Replacement Filter information

• Pre-sediment and carbon block. Superior 3-in-1 composite filter.
• Provides up to 6 months or 2100 litres of clean water.
• Simple replacement: Takes only 3 seconds and just a twist to change the filter.

WD-G3-N3CB

• 3-second replacement: Takes only a twist to change the filter.
• Provides up to 24 months or 8400 litres of clean water.
• Tested and certified by NSF/ANSI 58 for TDS reduction and NSF/ANSI 372 certified for lead-free material.
  

Informational Videos

How to install the G3P800 WaterDrop Tankless Reverse Osmosis

How to change filters on the G2P600 (Same procedure as for the G3P800)